Differences

This shows you the differences between two versions of the page.

Link to this comparison view

gnucap:manual:languages:spice [2018/05/22 06:58] (current)
felixs created
Line 1: Line 1:
 +SPICE has irregular and confusing syntax. The preferred way to use SPICE models is through subckt declarations. A subckt declaration can be parsed while the language is set to spice. Case sensitivity can be enabled (default is off in spice), in order to avoid problems later, when the netlist is expanded.
  
 +  spice
 +  .options noinsensitive
 +  .subcircuit mydev(a, b)
 +  .parameter r=1
 +  R1 a b r
 +  .ends
 +
 +The device above may contain more elaborate models and/or behavioural modeling quirks. Regardless it is now available, e.g. after switching to verilog (verilog is case sensitive by default).
 +
 +  verilog
 +  mydev #(.r(1k)) my_resistor(p, 0);
 +  vsource #(.v(1)) v1(p, 0);
 +
 +  // these commands are specific to gnucap
 +  print dc v(p) i(my_resistor.R1)
 +  dc
gnucap/manual/languages/spice.txt · Last modified: 2018/05/22 06:58 by felixs
 
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Run by Debian Driven by DokuWiki